Method for identifying the quality of wood-based panels

There are several methods to distinguish the quality of woodworking boards:

1. Look at the thickness (this method can also be used for other wooden boards), such as the standard thickness of 1.8 boards is indeed 1.8 mm, basically can be concluded that good boards, most of the boards in Nantong market thickness is not up to the standard, 1.8 boards slightly better 1.7 mm, quality only 1.6 or even 1.6 can not reach.

2. When you pick up the wood panel with poor shaking at one corner, you can hear the cracking sound like cracking sound, but if you are good, there is no sound. In addition, we can also see the amplitude of the swaying. The swaying amplitude of the good plate is very small. Because some boards can't see anything from their appearance before they are used, and once they are sawn, hollow parts can be seen in the middle and mixed with miscellaneous wood. This kind of board is very easy to deform. You should be careful.

3. The flatness of the panel can be seen either by eyes or by hand models. Poor woodworking boards have uneven surface and peeling phenomenon. Flatness can be divided into one side and two sides.

Another way is that the plate produced by a regular manufacturer will mark the brand and specifications by spray printing on the side of the plate, while the non-regular plate will only stick a sticker.